3-way RO kitchen tap
Hot, cold and RO drinking water.
One tap.
Replace your conventional kitchen mixer with a three-way mixer that keeps normal hot and cold water and adds a separate control for reverse osmosis drinking water.
ProposedThe tap supplier, finishes and certification are still being confirmed. This page describes the planned tap. It is not yet available for immediate installation.
How it works
Two controls. Three waters.
It looks and works like a kitchen mixer, because it is one. The difference is a second control and a dedicated waterway for drinking water.
- Normal hot and cold
- The main lever mixes hot and cold exactly as your current kitchen mixer does.
- Separate RO control
- A second control dispenses drinking water. It does not pass through the hot and cold mixing chamber.
- Dedicated internal channel
- RO water has its own waterway and outlet path inside the tap, so it does not blend with untreated water.
- No second tap
- The 3-way mixer takes the place of your existing mixer. Where your kitchen suits, no extra benchtop hole is needed.
- Under-sink RO connection
- The RO channel connects to a compatible reverse osmosis system in the cabinet below, with an 8 L or 16 L nominal storage tank.
- Not boiling or chilled
- RO water is dispensed at ambient temperature. Instant boiling and chilled water is a separate upgrade. If you ask for both, compatibility is assessed first.
Finishes
Proposed finishes.
- Matte black
- Brushed stainless
Finishes are confirmed with the tap supplier before any are offered. Approved finishes and product photographs are published here once they are verified.
WaterMark and WELS
Certified before it is offered.
| WaterMark | Required for a tap to be legally installed in Australia. Verified for the exact tap before it is offered. |
|---|---|
| WELS | Kitchen taps must be registered and carry a water efficiency rating. Verified for the exact tap before it is offered. |
| RO unit compliance | Assessed separately from the tap, for the exact unit supplied. |
Licence and registration numbers are published once the exact tap is confirmed. How we handle certification across the range is on the quality page.
Installation and compatibility
Checked against your kitchen.
The 3-way mixer is fitted by a licensed plumber in the position of your existing tap. These are confirmed before it is quoted.
- Existing tap hole size and positionAssessed
- Benchtop thickness and materialAssessed
- Sink and splashback clearanceAssessed
- Space under the sink for the RO unit and tankAssessed
- Hot, cold and RO connectionsAssessed
- Drain connection for the RO unitAssessed
Questions about the tap
Does the 3-way tap replace my existing kitchen mixer?
Yes. The existing mixer is removed and the 3-way mixer is fitted in its place during installation, where your benchtop and sink suit.
Does the RO water mix with normal tap water?
No. The RO water has a dedicated internal channel and its own control, separate from the hot and cold mixing chamber.
Is this a boiling or chilled water tap?
No. It delivers normal hot water from your hot water system, normal cold water, and ambient RO drinking water. Instant boiling and chilled water is a separate upgrade.
Which finishes are available?
Matte black and brushed stainless are proposed. Finishes are confirmed with the tap supplier before any are offered.
One clean, integrated kitchen tap.
Tell us about your home and whether you would like RO drinking water. A specialist confirms suitability and sends an installed price in writing.