01 / FAQs
Everything,
including the limits.
The water, the system, installation and cost, certification and guarantee, and what happens afterwards.
The water
Is tap water safe to drink?
Yes. Public water is treated to meet the health and quality standards it is required to meet. A whole home filter is not a correction for unsafe supply.
So what does the system actually do?
Sediment captures particulate within the cartridge rating. Carbon is selected to help improve chlorine-related taste and odour. A specialist third stage is chosen for your water.
Does it remove fluoride?
Only if the specialist cartridge fitted is independently tested for fluoride reduction, and we will only state that when the test reference exists.
What is the difference between softening and scale reduction?
A softener exchanges the calcium and magnesium that make water hard, usually with salt, so the water itself changes. Scale conditioning leaves the minerals in the water and changes how they behave, so they are less likely to form hard deposits. Our scale cartridge conditions; it does not soften.
Can silica be treated?
Silica is difficult to treat and is not removed by sediment, carbon or scale conditioning cartridges. Where silica spotting is the main concern, ask us about reverse osmosis for drinking water, and we will be honest about what it can and cannot do.
What does carbon filtration remove?
Activated carbon is selected to help improve chlorine related taste and odour. Reduction of specific chemicals such as PFAS depends on the exact cartridge and its test data, and we only state those claims where that data exists.
Does whole home filtration remove bacteria?
No standard whole home cartridge disinfects water. Public supply is already disinfected. An antibacterial cartridge can be fitted where the source calls for it, and any reduction claim follows its test data.
How does filtration affect water pressure?
Every filter causes some pressure drop. Full size cartridges and a low pressure drop carbon block keep it small. Pressure is measured at assessment and again at commissioning.
What about lead in old pipes?
Homes built before the 1980s may have lead solder or a lead service line. The Anti-Lead pack is the configuration tested for lead reduction. A filter is not a substitute for replacing a lead service line.
The system
How often do cartridges need replacing?
It depends on the cartridge and on household use. The interval for your configuration is written on the system and repeated in your reminder.
Will it reduce my water pressure?
The system is sized for whole home flow and is installed after the meter. Flow rate and pressure are checked at assessment.
Does it need power?
The standard three stage system does not. An RO unit and a boiling and chilled tap do.
Which outlets does it serve?
Everything downstream of the entry point. The connection list is confirmed at assessment.
Can it go on a rental or apartment?
Sometimes. It depends on the entry point, ownership and access. Send the details and we will tell you honestly.
Installation and cost
What does installation cost?
For a standard installation the labour is included when you buy a filter pack. You pay for the filter, we fit it.
How long does installation take?
Usually a few hours for a standard entry point, confirmed with your quote.
What counts as a standard installation?
A suitable entry point, clear access, a wall that will take the enclosure, and no roof work.
Do you service my postcode?
Australia wide. Your postcode is checked when you enquire.
What do replacement packs cost?
Carbon $249.00, Anti-Lead $281.82, Catalytic $300.00, PFAS $387.27, Scaleblock $404.55, all inc GST.
Standards, guarantee and plumbers
What does WaterMark mean?
WaterMark is the Australian certification scheme that makes a plumbing product legal to install. For a water treatment unit, that means certification to AS 3497.
Is the system WaterMark certified?
Yes. WaterMark certified to AS 3497, certificate 23512, and sold as lead free.
How does NSF certification work?
NSF/ANSI standards are American standards. An independent body tests a specific product against them and lists only the claims it passed, such as chlorine taste under 42 or lead under 53. We do not currently claim any NSF certification for a Home Water configuration.
How can I check a certification?
Ask for the certificate number, then look it up on the certification body's public register. Check that the brand, model and configuration listed match what is being installed.
What does the 10-year guarantee cover?
The cabinet, filter housings, manifold and supplied fittings for ten years, and our installation workmanship for two years. Cartridges are consumables. You also get lifetime Home Water care: support and filter reminders while we operate.
Who installs it?
A licensed, trade qualified plumber with water treatment experience. Installation is carried out to AS/NZS 3500.
How do I make a warranty claim?
Call 1800 418 562 with your installation record.
Does the guarantee depend on servicing?
Yes. Cartridges replaced at the specified interval and no unauthorised modification.
Aftercare
How do I know when to replace cartridges?
The interval for your configuration is recorded at installation and repeated in your reminder.
What support do I get after installation?
A number that answers: 1800 418 562. Taste, pressure, a leak at a fitting, or which pack to reorder.
Can I move the system if I renovate?
Often yes, and it is a plumbing job. Call before the renovation so it is planned properly.
What if I sell the house?
The system stays with the property. Tell us and the record can be updated to the new owner.
Still deciding?
Four questions, a recommendation, and a specialist to check it with you.
Start the finder